http://www.GuitarAmplifierPCBs.com
“Baby Will” Valve Junior Conversion
Version 4
Build Manual
22 September 2009
9 of 36
Unscrew the output jacks from the chassis and
separate the board from the chassis.
The board will be glued to the chassis. It
may require some extra work to pick the
glue off. Be careful not to damage the
board or the output jacks. They will be
reused later.
Flow the solder to each transformer
lead on the output jack board and pull
the lead out.
Remove the fastening nut at the star
grounding post and remove the output
board’s ground wire.
Clean up any remaining solder off the
board to assist in the installation of the
new transformer later in the build.
Now that all of the leads are free,
remove the mounting screws to
separate the transformer from the
chassis.