http://www.GuitarAmplifierPCBs.com
“Baby Will” Valve Junior Conversion
Version 4
Build Manual
22 September 2009
7 of 36
5. Let’s get started…
OK. So you have all the parts and are ready to start. Let’s get that EVJ chassis
out of the cabinet.
5.1 Remove the EVJ chassis
Take off the back panel by removing the seven (7)
screws using a Phillips head screw driver.
Be careful pulling off the back panel.
They are typically stuck onto the chassis.
Slowly pull from each side to prevent the
tolex from lifting off the panel.
Locate the screw caps on the top of the EVJ. Using
a standard screw driver, the smaller the better, pry
up the caps until you can pull them out of their
sockets.
Remove the four chassis screws and pull out the
chassis.
