epiphan VGA Bridge, Инструкция по установке

Страница: 6 / 18

2. Installation and Getting Started Quick Installation
Page 10 VGA Bridge
Figure 4: Location of the VGA Bridge Eth 1 port
To connect the VGA or DVI monitor or projector to the
VGA Bridge Receiver
You can select any VGA Bridge device to be the receiver. The
device automatically operates as a receiver when not connected to
a VGA or DVI source.
At the location of the VGA or DVI monitor or projector:
1 Connect the VGA or DVI monitor or projector to the VGA
Bridge OUTPUT port using a VGA or DVI cable.
If you are connecting a VGA monitor or projector, you require
a DVI to VGA converter. You can also use an active splitter to
split the VGA or DVI signal.
Figure 5: Location of the VGA Bridge OUTPUT port
2 Connect the VGA Bridge Eth 1 Ethernet port to the Ethernet
LAN.
To power everything on
1 Power on the VGA or DVI source to start sending VGA or DVI
signals to the VGA Bridge device.
2 Power on the VGA or DVI monitor or projector.
Eth 1
OUTPUT