2. Installation and Getting Started
Hardware Features
Page 14
VGA Bridge
INPUT
To connect a DVI or VGA source to the VGA
Bridge transmitter. To connect a VGA source you
require a VGA to DVI converter. See the
Bridge technical specifications
for information
about the VGA signaling, VGA modes, and video
modes supported by VGA Bridge devices.
INPUT also includes an audio port for future use.
OUTPUT
Connect a DVI or VGA monitor or projector to the
receiving VGA Bridge device to view transmitted
images. To connect a VGA monitor you require a
DVI to VGA converter.
You can also connect a VGA or DVI monitor or
projector to the VGA Bridge transmitter OUTPUT
port to view the images received by the transmitter.
OUTPUT also includes an audio port for future
use.
Factory
Reset
Button
Reset the device to factory default settings. To use
this button, disconnect power to the device, press
and hold the Reset button as you reconnect the
power. The blue LED lights up. Keep pressing the
Reset button until the blue LED turns off and the
Green LED lights up. Release the Reset button. The
VGA Bridge device starts normally but with all
settings returned to factory defaults.
Note:
You may have to re-configure the device’s
network settings to reconnect the device to the