epiphan DVI Broadcaster DL, Руководство пользователя

Страница: 80 / 112

System Administration
76
DVI Broadcaster DL User Guide
Address
Update interval Specify the frequency of time synchronization
Set time
manually This parameter enables manual time setting
Date (yyyy-mm-
dd)
Specify the date
Time (hh:mm:ss) Specify the time
RTC calibration:
(-31..+31). This field allows RTC calibration, the slowing or speeding
the clock up to 10 sec/day. Negative numbers slow the
clock down up to 5 seconds a day and positive numbers
speed up the clock up to 5 seconds a day.
11.2 Configuring Administrator Access
Initial factory settings provide no password for the administrator user. For security
reasons, a password to control access to the administration functions should be
added.
The administrator user’s password can be added or changed at any time in the
Access Passwords section of the Web Admin interface.
If you lose or forget the admin password you can reset the device to its factory
default setting. See Restoring the DVI Broadcaster DL Default Factory Configuration
in order to reset the device to factory defaults.
11.2.1
To add or change the Administrator password
1. Log into the Web admin interface.
2. Select Access Passwords .
3. Enter the new password in the New administrator password field. The
password is case sensitive and can include up to 255 ASCII characters.
4. Repeat the password using the Retype administrator password field.
5. Select Apply . The Web admin interface will log off the current
administrator user.
6. When prompted, re-log into the Web admin interface with the admin user
name and the new password.