Epilog Laser FiberMark Fusion 13000, Руководство пользователя

Страница: 57 / 202

Section 5: Installing the Epilog Dashboard
Print Driver
43
Installing the Dashboard Driver Using an
Ethernet Connection and a Crossover
Cable - Windows 7
If you using an Ethernet connection to print to the Fusion the first steps will show
how to set up your computer to talk to the Fusion before the driver is installed.
The process includes the following steps:
1. Setting the Ethernet IP Address on the laser,
2. Setting up the computer’s TCP/IP Address, and
3. Dashboard Driver Installation.
Note:
The following instructions work only for a direct connection from the
computer to the Epilog laser using a Crossover cable. This procedure does not
work with a hub or a server. For Ethernet connections that require a hub, server,
or multiple machines/computers, please consult with your network administrator.
Windows 8 instructions are included in
Appendix C:
Additional Dashboard Print Driver Instructions
of this
manual.
Hardware Requirements
 A 10Base-T or 10/100Base T Ethernet network card installed in your
computer. All brand name computers that have been built in the last
couple of years should have come standard with an Ethernet card installed.
 A crossover cable connecting your computer to the laser (included in your
accessories kit).