Quadro Manual I: Installation Guide
Step 2: Configuring the Quadro
Quadro2x, 2xi; Quadro4x, 4xi; Quadro16x, 16xi (SW Version 5.3.x)
35
The
Enable Hot Desking Capability
checkbox is used to enable the Hot Desking feature
on the corresponding IP line (see Manual II – Administrator’s Guide for more details).
The
Hot Desking Automatic Logout
section is used to configure Hot Desking functionality
expiration on the corresponding IP line. This may be useful when someone who logged in
to the public phone with the extension attached to this line forgot to log out after using it.
With this option enabled, once the expiration time arrives, the extension will automatically
log out from the public phone.
The following options are available:
•
Never
– the extension will never expire and will remain logged in to the public
phone.
•
After the defined period of time
– requires the period after which the extension
will automatically log out from the public phone.
•
At the certain moment
– requires the moment (hour and minute) when the ex-
tension will automatically log out from the public phone.
Reset the SIP Phone. After restart, the appropriate configuration will be automatically
downloaded from the Quadro to the SIP Phone.
Please Note:
For automatic configuration, some SIP phones may require additional actions
to follow the restart. For example, by default the IP Dialog SIP Tone II is in a non-auto pro-
visioning mode, so it should be manually enabled on the phone. Refer to the user’s manual
of the corresponding SIP phone for instructions on performing a factory reset or reboot on
any of the supported phones, what additional configurations are required for a specific SIP
phone, and how to manipulate with the GUI.
To make sure the line configuration works properly, do the following:
•
Go to
Quadro Status- SIP Registration status – Registered IP Lines
to see if
IP Line registration is successful.
•
Dial *74 to get the line information.
•
Make outgoing and accept incoming calls.
To make the IP line functional (for example, to be able to make/receive calls), refer to the
Step 4: Making/Receiving Calls
and
Appendix: Registering on Epygi’s SIP Server
chapters
further in this guide, with the difference that the extensions should be attached to the confi-
gured IP line.
