Quadro Manual I: Installation Guide
Step 2: Configuring the Quadro
Quadro2x, 2xi; Quadro4x, 4xi; Quadro16x, 16xi (SW Version 5.3.x)
26
Step 2.3: Internet Configuration Wizard
Open the
Internet Configuration Wizard
by selecting the corresponding menu item on the
System
menu. The
Internet Configuration Wizard
is a tool for the administrator to confi-
gure the WAN settings and to adjust Quadro's connectivity in the global network. It must be
run if Quadro is desired to be connected to the Internet.
The page
Getting Started
will be displayed:
Fig. I-22: Internet Configuration Wizard
This first page of the
Internet Configuration Wizard
is for informational purposes only and
lists the items to be configured, Click on the
Next
button for the
Uplink Configuration
page.
Before configuring the WAN port to the Internet, you need to get the following information
from your internet service provider:
•
Bandwidth - how much is available upstream and downstream?
•
WAN IP Configuration - is DHCP supported? If yes, no more information is needed.
If DHCP is not supported, the following data is needed: the WAN IP address, the
subnet mask, the IP address of the standard gateway and the IP address of the
Domain Name Server (DNS).
•
MAC address - needed when the ISP requires a specific MAC address for the
WAN.
Additionally, for Point-to-Point Protocol over Ethernet (PPPoE) WAN interface, you need to
get the following information from your internet service provider:
•
PPP Configuration - does your ISP use a dynamic or fixed WAN IP address? If the
WAN IP address is dynamic, no more information is needed. If the WAN IP address
is fixed, you will have to enter it.
•
Authentication - does your ISP require authentication? If authentication is required,
information about the corresponding method (PAP, CHAP or MSCHAP) is needed
including the username and password of the PPPoE account.
