Assemble the Backguard as shown: the Backguard also is the oven heat
vent and MUST be installed before using this appliance.
1) Remove the four (4) screws at the back of the range (B).
2) Align and screw the backguard to the holes at the back of the range
using the four (4) screws removed in step 1 (B).
NOTICE:
Before you use this range for the first time: The heating elements have a protective coating,
which must be burned off before use. To do this, open the oven door and set the temperature control knob to
450°F. Turn the function selector to the Bake element and the Broil element separately to approximately 15
minutes. It is important to ensure adequate ventilation during this period.
The burners also have a protective coating, which must be burned off before use. To do this, set the burner
selector to the maximum setting 5 minutes. It is important to ensure adequate ventilation. Switch off the
burners and allow cooling completely.
IMPORTANT:
This range is designed and manufactured solely for the cooking of domestic (household)
food and is not suitable for any non domestic application and therefore should not be used in a commercial
environment. The range warranty will be void if the range is used within a non domestic environment
i.e. a semi commercial, commercial or communal environment.
Carefully unpack the and ensure there is no damage to the oven, cooktop or structure and that the oven door
opens and closes properly. Remove all packing materials Packing elements (i.e. plastic bags, polystyrene
foam, packing straps, etc.) and keep out of reach of children to prevent possible serious injury. The range
has been thoroughly tested for safe and efficient operation. However, as with any appliance, there are
specific installation and safety precautions that must be followed to ensure safe and satisfactory operation.
Assembling the Backguard
Installation Instructions
4
!
4
!
4
!
4
!
4
!
4
!
Important Precautions and Recommendations
