EER20W | EER24W | EER24BL
REMOVING THE OVEN DOOR
To facilitate oven cleaning, it is possible to remove the door. Please follow the instructions carefully:
The oven door can easily be removed as follows:
- Open the door to the full extent (Fig. 1).
- Engage the retaining clips to both hinges (Left and Right) (Fig. 2).
- Hold the door on both sides as shown (Fig 5).
- Gently raise the door upward (towards the closed position to withdraw the lower hinge pins from their
position) (Fig 3).
- Gently pull the door outward to remove the door completely from the range (Fig. 4).
- Rest the door face down on a soft but sturdy surface.
- To re-install the door, repeat the steps above in reverse order.
REMOVABLE STORAGE DRAWER
For cleaning, you can remove the drawer by pulling it out until the stop
point and lifting it up.
Never store any flammable material in the drawer.
REPLACING THE OVEN LIGHT
Before any maintenance is started involving electrical parts of the appliance, it must be disconnected from the
power supply.
• Let the oven cavity and broil burner cool down.
• Switch off the electric supply.
• Remove the protective cover.
• Unscrew and replace the bulb with a new one suitable for high temperature (300°C ~ 570°C) having the
same specifications: 240V 60Hz, 15W, E14.
• Replace the protective cover.
NOTE:
Oven bulb replacement is not covered by your guarantee.
Step 5
Step 4
Step 3
Step 2
Step 1
