REV. 08/2019
2
G
Settings
When repairing or replacing hydraulic, electric or electronic components or assemblies, always
note the truck specific settings.
Hydraulic hoses
The hoses must be replaced every six years. When replacing hydraulic components,
also replace the hoses in the hydraulic system.
Servicing and inspection
Thorough and expert servicing is one of the most important requirements for the safe operation
of the truck. Failure to perform regular servicing can lead to truck failure and poses a potential
hazard to personnel and equipment.
The service intervals stated are based on single shift operation under normal operating
conditions. They must be reduced accordingly if the truck is to be used in conditions of extreme
dust, temperature fluctuations or multiple shifts.
The following maintenance checklist states the tasks and intervals after which they should be
carried out. Maintenance intervals are defined as:
W = Every 50 service hours, at least weekly
A = Every 250 operating hours
B = Every 500 operating hours, or at least annually
C = Every 2000 operating hours, or at least annually
W service can be performed by the customer.
In the run-in period - after approx. 100 service hours - or after repair work, the owner must
check the wheel nuts/bolts and re-tighten if necessary.
1.3
Содержание JX0-30
