EP Equipment JX0-30, Руководство по эксплуатации

Страница: 34 / 74

REV. 08/2019
3 C
EMC-Electromagnetic compatibility
Electromagnetic compatibility (EMC) is a key quality feature of the truck.
EMC involves
limiting the emission of electromagnetic interference to a level that ensures the troublefree
operation of other equipment in the environment.
Ensuring sufficient resistance to external electromagnetic interference so as to guarantee
proper operation at the planned usage location under the electromagnetic interference
conditions to be expected there An EMC test thus firstly measures the electromagnetic
interference emitted by the truck and secondly checks it for sufficient resistance to
electromagnetic interference with reference to the planned usage location . A number of
electrical measures are taken to ensure the electromagnetic compatibility of the truck.
Our
truck
has been successfully tested according to EN12895 as well as the standardised
instruction contained there in.
CAUTION
The EMC regulations for the truck must be observed.
When replacing truck components ts for repair the protective EMC components must be
installed and connected again.
1.4
•
•
•
Battery Safety
WARNING
Batteries contain dissolved sulfuric acid, which is poisonous and caustic. Batteries also can
produce explosive gases.
Remain aware of the following information.
Wear protective equipment (protective apron and gloves) and protective glasses when
working with battery acid. If clothing, skin or eyes come into contact with battery acid,
immediately flush the affected areas with water. If acid contacts the eyes, seek medical
attention at once. Clean spilled battery acid immediately with large amounts of water.
Remove any metal rings, bracelets, bands, or other jewelry before working with or near
batteries or electrical components.
Never expose batteries to open flame or sparks.
Areas in which batteries are stored or charged must be well ventilated to prevent
concentration of explosive gases.
If a battery is charged while installed in the truck, the battery cover must remain completely
open during the entire charging period unless the battery is maintenance free and does not
gas out.
Shorting of battery terminals can cause burns, electrical shock, or explosion. Do not
allow metal parts to contact the top surface of the battery. Make sure all terminal caps are in
place and in good condition.
Batteries may only be charged, serviced, or changed by properly trained personnel.
Always follow all instructions provided by the manufacturers of the battery, charger, and
truck.
1.3
•
•
•
•
•
•
•