EP Equipment JX0-30, Руководство по эксплуатации

Страница: 16 / 74

REV. 08/2019
7 B
OR
After turning on the key switch, if the truck is in normal condition, the first, seventh
and tenth lights will be on; Operate the lifting switch, while the lifting height of the
storage table is lifted to the top, inspect if the third, fifth, fourth and eighth lights are
on, only when all of them are on can the truck be operated after the inspection.
i
NOTE
Each light indicates the status of its corresponding switch, whether the switches are
working normally can be judged from the status of the lights. For details, refer to the
table below.
Item Component Item Component
1
Dead man switch and sensor
switch
11
right hand enable switch
2
inclination sensor switch
12
aux lift switch
3
traction cutback switch3 13 aux lower switch
4
traction cutback switch2 14 horn
5 lift stop switch 15 /
6 slack chains(NC) switch 16 main lift switch
7 sidegate switch 17 forward switch
8 traction cutback switch1 18 main lower switch
9 slack chains switch 19 Reverse switch
10 left hand enable switch