EP Equipment JX0-30 Скачать руководство пользователя страница 48

Страница: 48 / 74

REV. 08/2019

Operator daily checklist

At the beginning of each shift, inspect your truck by using the EP Operator’s Daily

Checklist. If necessary, refer to the Maintenance section of this manual for details on how

to carry out this inspection. Check for damage and maintenance problems. Any necessary

repairs must be completed before the truck is operated. In addition to daily inspection,

scheduled maintenance is vital to safe operation of the truck. Adhere to the inspection,

lubrication and maintenance schedule given in the Maintenance section of this manual.

Check for Fluid Leakage

Check the entire truck as w

ell as the surface beneath it for signs of fluid leakage.

Check drive wheels and load wheels for damage

Inspect the drive wheels and load wheels to see if there is any damage, and the function is

normal.

Check Battery Connector

Disconnect and reconnect the battery to confirm smooth operation. Inspect the battery

connector and its cables for damage.

Check Decal Condition

Inspect all decals and the data/capacity plate for condition and legibility. Decal locations

are given in the Overview section of this manual. Any damaged or unreadable decals must

be replaced.

Check Operating Controls

Operate the truck in forward or reverse.

Brake Interlock - Travel Control

Operate the truck in forward or reverse. Release the travel control without moving the

control handle out of its operating range. The truck should slow to a stop using electric

braking.

Perform Operational Check

Before returning the truck to service, perform an operational check of the following items:

Electro-magnetic brake (audible sound during engage/release)

Multi-function display/battery discharge indicator

Horn

Forward and reverse travel

Electric braking

lift and lower function (operate through complete range of motion)

Working lights (if equipped)

1.10

Содержание JX0-30











































































Результаты поиска

Содержание JX0-30

Отзывы:

Похожие инструкции для JX0-30

Бренды по названию

Популярные бренды

EP Equipment JX0-30, Руководство по эксплуатации

Результаты поиска

Содержание JX0-30

Отзывы:

Похожие инструкции для JX0-30

Бренды по названию

Популярные бренды