11
12
7-1. Press “0”key to input values.
7-2. Press “ P " key to adjust the input
digit bit.
25kg
5
.
Battery replacement
Diagram for disassembly of battery cover
Battery holder
Battery cover
1
2
The instrument uses 2 CR2447 button cells.
As shown in the Figure, slide down instrument battery cover to remove the used battery for replacement;
put the new battery into the battery holder, and then close the battery cover.
6
.
Routine maintenance
Please check the oil level every six months and change the oil every twelve months. 32 # hydraulic oil is
recommended, with total volume of about 0.5 liters.
Replace the battery in time if power monitoring icon as displayed is blank or data displayed is
indistinct.
It is better not to put the instrument into prolonged outdoor operation in case of rain and snow;
prolonged exposure of instrument to the sunshine is strictly prohibited.
It is applicable to clean the instrument shell with soft and clean cloth in combination with routine
washing solvent; never use industrial solvent for cleaning or directly spray it on the instrument
surface.
It is recommended that users check the instrument and sensor regularly to ensure its accuracy
during use.
7-3. Press “0”key to input value of
corresponding digit bit.
7-4. Example: Calibration with 25KG
counterweight.
8. Complete input, and Press “T” key
for confirmation.
9. Calibration is deemed to be completed
once “CALOK” is displayed on the screen.
E20V Series Scale Pallet Trucks
Operating Instructions