09
10
3.2Default unit setting
Default unit of the system is kilogram (KG).
The first option in parameter setting mode is default unit setting; when “ UNIT” is displayed on the screen,
press “ T” key to confirm entry into unit setting mode; press “U” key for cancellation to proceed with next
setting.
Once default unit setting is confirmed, press “0”key repeatedly for cyclic switching among the units as
displayed on the right side of screen: “ KG” , “ T” , “ OZ” and “ LB” , representing “kilogram” , “ ton” ,
“ ounce” and “ pound” respectively; press “ T” key to confirm the setting, and proceed with next setting.
3.3Back light mode setting
Default back light mode of the system is OFF; shortly press “ P” key to turn on the back light when back
light cursor is displayed on the screen in back light mode.
Once default unit setup is completed, proceed with setting of back light; when “ BLMOD”is displayed on
the screen, press “ T” key to confirm back light mode setting; press “U” key for cancellation to proceed
with next setting.
Once back light mode setting is confirmed, press “ 0” key for cyclic switching of items displayed on the
screen; “ BL ON” and “ BL OFF” refer to Back Light On and Off respectively; press “T” key to confirm
setting, and proceed with next setting.
3.4Auto Power-off Time Setting
Default auto power-off time of the system is 5 minutes when cargoes remain unchanged.
Proceed with auto power-off time setting once back light mode setting is completed; when “ POWTM” is
displayed on the screen, press “ T” key to confirm entry into auto power-off time setting; press “ U” key
for cancellation to proceed with next setting.
Once auto power-off time setup is confirmed, press “ 0”key for cyclic switching among 1-9, representing
auto power-off time (in minute); press “ T” key to confirm the setup, and proceed with next setup.
1.
Press
“U” key and “T” key simultaneously
for Setup mode in normal mode.
4.Calibration
Operating Instructions
E20V Series Scale Pallet Trucks
2 .Press the
“
T
”
key to enter the setup
mode
3. Press the
“
U
”
key to skip the
“
unit
settings
”
4. Press the
“
U
” key to skip the
“
back
light setting”
5. Press the
“
U” key to skip the
“
power
-off time setting”
6. Make sure that here is no cargo on
the frame, and Press “T” key to confirm
calibration.
