22
EN
Pairing and setup
In order to use the WCI01 remote control module you need install the software (web
app) on your mobile device (smartphone or tablet PC).
Currently supported are devices with an Android or an Apple iOS operation system.
Download and install the free app „EOS Sau-
na Control“ directly from the App Store (for
Apple devices) or Google Play Store (for Android devices).
You can use the search for key words “EOS” and “sauna”.
After the download and installation of the app you have
to pair to the sauna control unit. Before you proceed make
sure the remote control module WCI01 has an internet
connection.
Start the app on your mobile device. After a short start-up
screen the app will open a setup window with the lan-
guage selection. Select your operation language. Next a
prompt window for the MAC address will open.
You can find the MAC address on the sticker attached to
the side of the module housing
.
Give in the MAC address into the appropriate fields on the
screen. In the next fields you can assign an own name to
your sauna and to your mobile device, for instance “sauna 1” and “Joe’s phone”. This helps later to
better identify and manage users.
Now press the pairing button
to initiate pairing. Under
normal conditions the app will establish connection to the con-
trol unit and will prompt you to confirm the pairing by press-
ing with a thin sharp object on the hidden button through the
small opening on the top of the module housing.
Notice: you have 60 seconds time to press the button on the
module. By successful pairing the control LED shall flash in
red light shortly.
If the button is not pressed within the given time the pairing will be aborted and has to be repeat-
ed once again.
Once the pairing has been completed the app will automatically detect the model of the sauna
control unit and will display its replicated interface. If the pairing has failed the app will return to
the initial prompt window (MAC address prompt).
If the app on the already paired device has been deleted and reinstalled, the pairing has to be
carried out once again. Also if a user has been deleted from the list of authorized users (by another
user) he will need to make the pairing once again in order to access the control unit.
pairing button
control LED
Choose language
