EOS VITAE, Инструкция по сборке и эксплуатации

Страница: 20 / 38

20
EN
Fig. 2
!
Caution!
Remove the transport stabilisers from before
installation. Remove the cover grill. Remove
the foamed pad including all small pieces.
Make sure not to damage the emitter.
Fig. 1
Electrical connection
Before installation
IR-radiators -
max. 3500 W
Plug adaptor,
Item 944960
Connection to
control unit,
Item 944396
Fig. 2
Fig. 2b
1
3
5
2
4
7
9
6
8
Connection example - 5 IR radiators
in one joined line
Connection example - 9 IR radiators
in one joined line
Connect the IR radiator to the control unit as
advised in the control unit installation manual.
The cable is fitted with a 3-pole plug. For in-
stallation purposes the plug is included in dis-
assembled condition. Assemble the plug after
you have installed the cable.
If your control unit has the corresponding ca-
ble with plug, connect the IR radiator using
this plug. Otherwise you can alternatively use
the special connection cable (item 94.4396) for
connection to the control unit.
Draw the connection cables through the ducts
or protect them in an other appropriate way.
By connection of several IR radiators to one
common line an optional plug adaptor (item
94.2046) should be used (fig. 2). Up to 2 such
plug adaptors can be connected to each other
(fig. 2b).
The maximal total power load should not ex-
ceed 3500 W. By Vitae 750 - max. 4 radiators
possible.
Cable 2,5 m
Item 944396
IR plug adaptor
Item 944960
Protective foam
The maximal total power load should not ex-
ceed 3500 W. By Vitae 750 - max. 4 radiators
possible.
IR plug adaptor with exten-
sion cable, item 942046
IR-radiators -
max. 3500 W