EN-14
Installation and Operating Instructions - SBM-App Modul
EN
Mounting and electrical installation
3
Mounting and electrical installation
This chapter describes how to install and set up the SBM-App module.
NOTICE
Damage due to incorrect mounting location
Weather conditions lead to the formation of condensation in the
housing of the SBM-App module and destroy the lines and circuit
boards.
Mount and operate the module only inside buildings.
Protect the module from splashes of water, high levels of humi-
dity or moisture. Protect the module in a suitable housing (IPx4,
see DIN EN 60335-2-53).
Protect the module from conditions in the ambient air that pro-
mote corrosion.
Protect the module from frost and direct sunlight.
Protect the module from mechanical damage.
Salt aerosols should only be used inside the cabin.
3.1
Scope of delivery
The following components are included in the scope of delivery:
SBM-App module
Sauna bus cable
Installation and Operating Instructions
Check the scope of delivery for completeness prior to mounting and instal-
lation.
