Press the switch on the left side of the rocker
to the first latch (
switch setting 0
). The switch
will be in the middle position. The unit is now
completely switched off (disconnected).
To turn the light on in the cabin while the unit is
still disconnected push the left side of the rock-
er to the second latch (
switch setting II
).
To make the unit ready for operation, switch back
to the initial position (
switch setting I
). The unit
will return to stand-by mode.
Device switched on.
(default Position I)
Device switched on.
Position I.
Device switched off
(completely);
Position 0.
Light enabled;
Device switched off.
Position II.
Switch-off
The control unit is equipped with a “Switch-off”
rocker switch.
This switch allows to switch the control unit to
the standby mode (notice the heating will not
start), to switch the control unit completely off
(disconnect from power) or to switch the con-
trol unit off but to leave the light switched on.
Notice: if you leave the control units switched
off for more than 24 h all personal settings will
be lost. You will have to repeat setup.
Attention!
Parts of the printed cir-
cuit board will still remain energized in the
switched off condition! Risk of electric shock!
The device „Switch-off“ switch
Device’s main switch
27
EN
