14
EN
Installation of the op-
tional heating foil sensor
Installation location:
The heating foil sensor shall be mounted in the
area of the overheating protection of the small-
est heating foil installed and shall be relaibly
fixed with a strain safeguard.
CAUTION!
Measurement value falsifica-
tion!
If the heating foil sensor is not directly mounted
onto the IR heating foil, the measurement val-
ues will be falsified. Therefore place the heating
foil sensor directly onto the heating foil.
Only mount the heating foil sensor when
using IR heating foils with integrated overheat-
ing protection.
• Mount the sensor directly between the heat-
ing foil and the insulation.
IR
Sensor
IR heating foil
Overheating pro-
tection
Insulation
O u t s i d e
wall
I n s i d e
wall
• Fix the heating foil sensor cable outside the
IR heating foil with the strain relief
IR heating foil
Overheating pro-
tection
Heating foil sensor
Strain relief
CAUTION! Do not damage the IR heating
foil during installation.
• Draw the sensor line to the control power
unit and connect to the S2 terminals.
