background image

General Terms and Conditions of Service

I. Scope

Unless otherwise agreed in writing in a specifi c case, the-
se terms and conditions of service shall apply to service 
operations,  including  examining  and  repairing  com-
plaints. All our existing or future legal relationships shall 
be  governed  solely  by  the  following  terms  and  condi-
tions of service. Our recognition of any confl icting terms 
and  conditions  of  the  Ordering  Party  shall  be  conditio-
nal upon our having given our express written consent 
to their applicability. We hereby expressly object to any 
terms  and  conditions  of  the  Ordering  Party  contained 
in its General Terms and Conditions of Business or order 
confi rmation. If order confi rmations or deliveries are ac-
cepted without reservation, this shall not be deemed to 
constitute recognition of such terms and conditions. Any 
ancillary agreements or amendments must be confi rmed 
in writing.

II. Prices and Payment Terms

The  Ordering  Party  shall  bear  the  following  costs  in 
connection with the service operation:  

•  Disassembly/assembly  and  electrical  (de-)  instal-

lation

•  Transportation, postage and packaging

•  Function  testing  and  troubleshooting  including 

inspection and repair costs

There shall be no third-party billing.

III.  Performance  Obligations  /  Ordering  Party‘s 
Cooperation

The Ordering Party shall provide free-of-charge assi-
stance  to  the  manufacturer  in  carrying  out  the  ser-
vice operation. 

In  the  case  of  a  warranty  claim,  the  manufacturer 
shall  make  the  replacement  parts  necessary  for  the 
service available to the Ordering Party free of charge. 

IV. Service Visit by the manufacturer

In  the  event  that  it  is  essential  that  a  manufacturer 
employee carry out the service operation on site, this 
must be agreed in advance. Where the main reason 
for  the  service  call  is  not  the  fault  of    the  manufac-
turer,  any  costs  incurred  shall  be  recharged  to  the 
Ordering Party after the service visit.

V. Liability

The  manufacturer  shall  assume  liability  in  accordance 
with  the  currently  applicable  statutory  regulations. The 
packaging for all of our products is designed for the ship-
ping of individually packed goods (pallet). We expressly 
point out that our packaging is not suitable for individual 

shipments via parcel post. The manufacturer shall accept 
no liability for damage incurred as a result of improper 
packaging in an individual shipment.

VI. Manufacturer‘s Warranty

The  manufacturer‘s  warranty  shall  apply  only  in  the 
event that installation, operation and maintenance have 
been carried out in accordance with the manufacturer‘s 
specifi cations  contained  in  the  assembly  instructions 
and instructions for use. 

• The warranty period shall commence from the date 
on which proof of purchase is provided and shall be 
limited, in principle, to 24 months.

•  Warranty  services  shall  be  performed  only  if  the 
proof of purchase relating to the equipment can be 
presented.

• Any and all warranty claims shall become void if mo-
difi cations  are  made  to  the  equipment  without  the 
manufacturer‘s express consent.

•  Any  warranty  claim  shall  likewise  become  void  in 
the case of defects that arise due to repairs or inter-
ventions  made  by  unauthorized  persons  or  due  to 
improper use.

• In the case of warranty claims, the serial and article 
numbers  must  be  indicated  together  with  the  desi-
gnation and a meaningful description of the fault.

• This warranty shall cover defective equipment parts, 
with the exception of normal wear parts. Wear parts 
shall  include,  among  other  things,  light  sources, 
starters, gas or oil pressure dampers as well as acry-
lic glass panes, tubular heating elements and sauna 
heater stones.

• Only original replacement parts may be used within 
the warranty.

•  Service  visits  by  outside  companies  shall  require  a 
written order to be issued by our service department.

•  The  equipment  in  question  shall  be  sent  to  our 
service department by the Ordering Party and at its 
expense.

• Electrical assembly and installation work, including 
in  the  event  of  service  or  replacement,  shall  be  car-
ried out at the Customer‘s expense and shall not be 
borne by the manufacturer.

Complaints in respect of our products shall be reported 
to the specialist trader responsible and shall be exclusi-
vely handled via the latter.

The  manufacturers  General  Terms  and  Conditions  of 
Business, as amended, shall apply in addition to the fo-
regoing terms and conditions of service.

 

 

 

 

 

 

 

As of 06/2015

42

GB

Содержание ECON H4











































Отзывы: