20
GB
Modifiable value
To adapt the individual values to the respec-
tive requirements, the
MODE
button must be
pressed briefl y from the standby screen.
Those parameters that can be changed are
shown in black and the required parameters
can be selected with the
or
buttons.
12:15
30°C
5 : 59
- - : - -
Temperatur
Feuchte
Auto-Stop
Vorwahlzeit
You can reach the parameter level by pressing
the
MODE
button.
The name of the parameter is now blinking and
the modifi able value is highlighted in black.
The value shown in black can be changed via
the
or
button.
All settings made from the standby mode are
confi rmed by pressing
MODE
for >3 secs and
are saved in the device.
The parameter stops fl ashing and the new va-
lue is valid until it is changed again.
12:15
30°C
5 : 59
- - : - -
Temperatur
Feuchte
Auto-Stop
Vorwahlzeit
Modifiable parameter
12:15
30°C
5 : 59
- - : - -
Temperatur
Feuchte
Auto-Stop
Vorwahlzeit
If no button is pressed for >15 secs, the device
returns to the basic screen. Any changes made
will not be saved
Cabin lighting
Every time that the sauna system is activated,
the cabin lighting is automatically switched on.
The
symbol is shown at the top left of the
display. If the sauna system is switched off , the
cabin lighting is also switched off after a delay
of 30 minutes.
Regardless of the operational state of the sauna
system, the cabin lighting can be switched on
or off at any time via the
button.
12:15
30°C
5 : 59
- - : - -
Temperatur
Feuchte
Auto-Stop
Vorwahlzeit
Parameters that blink on the display can be
changed and are shown in these instructions
as displayed.
Temperatur
