27
EN
Modifiable value
Modifiable parameter
12:00
Temperature
90°C
Auto-Stop
5:59
Start time
- - : - -
P1
12:00
Temperature
90°C
Auto-Stop
5:59
Start time
- - : - -
P1
12:00
Temperature
90°C
Auto-Stop
5:59
Start time
- - : - -
P1
Press the
MODE
button again shortly to start
the adjustment for the selected parameter.
The background of the value of the selected
parameter will be flashing.
Now you can adjust this value using the
or
buttons.
All settings made in the standby mode should
be confirmed by pressing
MODE
for >3 secs and
are then saved in the current profile.
The parameter stops flashing and the new val-
ue becomes valid until it is changed again.
If no button is pressed for >15 secs, the device
returns to the standard screen. Any changes
made will not be saved.
Parameter values that flash on the display can
be changed and are shown in this manual as
displayed.
Operation principle
For settings press shortly the
MODE
button.
The first parameter (temperature) will be se-
lected and shown inverted.
Use the
or
buttons to navigate to the
required parameter which you would like to
adjust.
Temperature
12:00
90°C
5 : 59
- - : - -
Temperature
Auto-stop
Start time
P1
