NOTICE
Damage due to steam and humidity
Condensation can form when the door is opened, which can fog over the display. This can lead to
the formation of condensation in the control unit and malfunctions.
Mount the control unit outside of the area in which the humid warm air mixture can spread.
Mount the control unit on the hinge side of the door.
Tools required:
Saw for cutting the wall (only for recessed installation in the wall).
Screw driver.
Taut wire, as needed.
Wooden screws (included in the scope of delivery): 3 pcs when mounting on the wall
Removing the front cover
Remove the front cover from the
housing.
1. Unscrew the screw on the top of
the housing.
2. Swivel the front cover and remove
it downward.
Preparing the air inlets
Determine the line openings in the hous-
ing.
A. Openings for mains, heater, light lines
B. Openining for sensor and limiter fuse
Break the plates from out of the openings.
Insert the bushings.
A
B
Fig. 2
Fig. 3
15
EN
