EOS ECON 45H2, Инструкция по сборке и эксплуатации

Страница: 22 / 52

22 GB
19 : 00
19 : 00
17 : 10
17 : 10
Using the set time function, you can select the time that your sauna heater switches on up
to 24 hours ahead.
If you want to start the unit in humidity mode, fi rst press the button. The red humidity LED
then displays that the unit is running in humidity mode.
Starting with set time
Always ensure at this point that there are no objects on top of the sauna
heater when the heating cycle starts. Fire risk!
Please consider that the cubicle must heat
up for around 40-50 minutes to achieve an
appropriate temperature. If, for example, you
want to start your sauna at 18.00 select the
preset time to 17.10.
The set time display can always
be recognised by the flashing
colon.
Press the „ MODE “ button. The display starts
to fl ash.
Using the and buttons, you can now
set the desired set time.
To save the new set time, press the „ MODE “
button and hold it down until the newly ente-
red value is permanently displayed.
Press the or button until the set set
time is displayed.