EOS ECON 45H2, Инструкция по сборке и эксплуатации

Страница: 20 / 52

20 GB
95°
95°
85°
Changing the temperature
In the following one we show, how you can stop the temperature of the Sauna your desires
accordingly. Please take into consideration that these values can vary by a few degrees,
depending on cabin confi guration. For safety reasons the temperature is measured in the
hottest area of the cabin above the oven. This temperature serves as a value for the tempe-
rature around the sauna benches. Depending on oven capacity and placement of the fresh
air vents, undesirable infl uences can alter these measurements, not allowing the maximum
temperature to be reached. The control range is laid out so that normal temperatures in the
bench area can be preselected.
Changing the preset parameters
In order to change the preset parameters for temperature and humidity level, the
sauna must be switched off.
If no input is made for more than 10 secs. during programming, the unit automatically
switches back to its resting state without saving the modifi ed values
Option 1:
If you want to use the sauna right away.
Press the or button until the set tempe-
rature is displayed.
Press the „ MODE “ button. The display starts
to fl ash
Using the and buttons, you can now set
the desired temperature.
Press the button..
The set temperature is saved, the sauna
switches on and is regulated to the new set
temperature.
You now have two options.
.