background image

General Terms and Conditions of Service

I. Scope

Unless otherwise agreed in writing in a specific case, 

these terms and conditions of service shall apply to ser-

vice operations, including examining and repairing com-

plaints. All our existing or future legal relationships shall 

be governed solely by the following terms and condi-

tions of service. Our recognition of any conflicting terms 

and conditions of the Ordering Party shall be conditional 

upon our having given our express written consent to 

their applicability. We hereby expressly object to any 

terms and conditions of the Ordering Party contained 

in its General Terms and Conditions of Business or order 

confirmation. If order confirmations or deliveries are ac-

cepted without reservation, this shall not be deemed to 

constitute recognition of such terms and conditions. Any 

ancillary agreements or amendments must be confirmed 
in writing.

II. Prices and Payment Terms

The Ordering Party shall bear the following costs in 

connection with the service operation:  

•  Disassembly/assembly and electrical (de-) instal-

lation

•  Transportation, postage and packaging

•  Function testing and troubleshooting including 

inspection and repair costs

There shall be no third-party billing.

III. Performance Obligations / Ordering Party‘s 

Cooperation

The Ordering Party shall provide free-of-charge assis-

tance to the manufacturer in carrying out the service 

operation. 

In the case of a warranty claim, the manufacturer 

shall make the replacement parts necessary for the 

service available to the Ordering Party free of charge. 

IV. Service Visit by the manufacturer

In the event that it is essential that a manufacturer 

employee carry out the service operation on site, this 

must be agreed in advance. Where the main reason 

for the service call is not the fault of  the manufactur-

er, any costs incurred shall be recharged to the Order-

ing Party after the service visit.

V. Liability

The manufacturer shall assume liability in accordance 

with the currently applicable statutory regulations. The 

packaging for all of our products is designed for the ship-

ping of individually packed goods (pallet). We expressly 

point out that our packaging is not suitable for individual 

shipments via parcel post. The manufacturer shall accept 

no liability for damage incurred as a result of improper 
packaging in an individual shipment.

VI. Manufacturer‘s Warranty

The manufacturer‘s warranty shall apply only in the 

event that installation, operation and maintenance have 

been carried out in accordance with the manufacturer‘s 

specifications contained in the assembly instructions 
and instructions for use. 

• The warranty period shall commence from the date 

on which proof of purchase is provided and shall be 

limited, in principle, to 24 months.

• Warranty services shall be performed only if the 

proof of purchase relating to the equipment can be 

presented.

• Any and all warranty claims shall become void if 

modifications are made to the equipment without 

the manufacturer‘s express consent.

• Any warranty claim shall likewise become void in 

the case of defects that arise due to repairs or inter-

ventions made by unauthorized persons or due to 

improper use.

• In the case of warranty claims, the serial and article 

numbers must be indicated together with the desig-

nation and a meaningful description of the fault.

• This warranty shall cover defective equipment parts, 

with the exception of normal wear parts. Wear parts 

shall include, among other things, light sources, start-

ers, gas or oil pressure dampers as well as acrylic glass 

panes, tubular heating elements and sauna heater 

stones.

• Only original replacement parts may be used within 

the warranty.

• Service visits by outside companies shall require a 

written order to be issued by our service department.

• The equipment in question shall be sent to our 

service department by the Ordering Party and at its 

expense.

• Electrical assembly and installation work, including 

in the event of service or replacement, shall be car-

ried out at the Customer‘s expense and shall not be 

borne by the manufacturer.

Complaints in respect of our products shall be reported 

to the specialist trader responsible and shall be exclu-

sively handled via the latter.

The manufacturers General Terms and Conditions of 

Business, as amended, shall apply in addition to the fore-
going terms and conditions of service.

 

 

 

    As 

of 

06/2015

18

EN

Содержание Bi-O Cubo



















Отзывы: