6
Installation and Operating Instructions - MEGA
General safety instructions
EN
1.2 Mounting and electrical installation
These installation instructions are intended for qualified person-
nel familiar with the laws and regulations applicable to electrical
installations at the installation site. Observe the following general
safety instructions during mounting, configuration and commis-
sioning of the product.
Risk to life and limb
and risk of fire
Risk to life and limb from electric shock and fire in the event of im-
proper or faulty electrical connection. This risk also applies follow-
ing completion of the installation work.
The electrical installation of the heater, relay boxes and other
electrical systems or equipment with a fixed mains connection
must only be performed by a trained electrician from an author-
ised electrical company.
Observe the specifications found in VDE 0100 § 49 DAA/6 and
VDE 0100 Part 703/2006-2.
The system must be disconnected and removed entirely from
the mains supply before commencing installation and repair
work.
The housing cover must only be removed by a specialist.
Read and observe the present installation instructions.
Fire hazard from
overheating
Insufficient ventilation can lead to device overheating and fire.
Install the air inlet and outlet in the cabin.
Observe the cabin manufacturer's safety and installation in-
structions.
Risk of burns from
hot glass
Glass surfaces in the cabin become hot while the sauna is in oper-
ation.
When installing the cabin, ensure that the touchable glass sur-
faces on the outside of the cabin may reach a maximum tem-
perature of 76°C. Protective devices must be attached as
needed.
Risk of burns from
hot unit
During operation, the sauna heater may become hot and, if
touched, could cause burns.
Maintain a safe distance.
