EN-76
Installation and Operating Instructions - EOS Compact DC/HC
EN Operation
6.7.10 ECO mode (temperature decrease)
ECO mode can be activated during intermissions in operation to lower the
temperature without allowing the cabin to cool down completely. The
heating must be switched on to activate ECO mode.
It is not possible to activate ECO mode if HOT mode is on. The factory sets
the runtime for ECO mode so that it is ended manually or when the sauna
heater is switched off. The runtime can be set, see: 6.8.1 Runtime for ECO
mode,
ECO mode can also be switched on (recommended) via a button that is
available as an option (ECO module), see: 2.5 Accessories,
Switching ECO mode on/off
1
Choose the ECO mode function.
After switching on the system, the time remaining for ECO mode is
displayed in the status bar:
.
6.7.11 Retrieving temperature/humidity values
You can retrieve the current actual temperature at all times. This also
applies to the humidity if humidity mode is on.
The displayed values correspond to the values measured directly by the
sensors. Due to the fact that, in a sauna, temperature zones vary greatly,
the values can differ significantly from what is shown on the thermometer/
hygrometer display on the wall.
We therefore recommend that you make adjustments to find the tempera-
ture/humidity values
that work best for you.
05:47:13
