EN-36
Installation and Operating Instructions - EOS Compact DC/HC
EN Installation
3.6
Mounting the bench sensor (optional)
The bench sensor is mounted on the ceiling above the back sauna bench
across from the sauna heater.
Installation configuration – bench sensor
To mount the bench sensor, see the handbook for the heater sensor:
Mounting the heater sensor in the cabin,
3.7
Mounting the cabin lighting
Lighting can be installed anywhere, however not near rising hot air. The
light output in the relay box is set to inductive load by default, but light
bulbs, halogen HV bulbs and other resistive loads may also be connected
to it. If required, the light output can also be manually set to capacitive
loads.
Cabin lighting is not included in the scope of delivery. Observe the sepa-
rate installation instructions for lighting.
Light source requirements:
Minimal output 5 W
Resistive loads max. 100 W
Dimmable energy-saving bulbs max. 35 W
Light sources with conventional transformers max. 60 VA
Dimmable LED bulbs max. 60 W
