EOS Compact DC/HC - Installation and Operating Instructions
EN-33
Installation
4
Open the heater sensor housing, remove the receiving disk and connect
the cable to the receiving disk.
Connection for lines to the receiving disk
The safety temperature limiter is available only in the heater sensor.
These work steps do not apply to the bench sensor and multisensor.
If multiple sauna heaters are installed in a sauna cabin, it may be
necessary to install additional safety temperature limiters and
connect them in series.
5
Insert the receiving disk in the bottom of the housing.
A
Connection for safety temperature
limiter
B
Connection for temperature sensor line
C
Temperature sensor
D
Safety temperature limiter
A
C
B
B
A
D
