2
Call 1300 369 273
www.enware.com.au
Enware Touch-Free Wall Sensor Tap is a sensor operated, hands-free tap that is installed onto walls
above sinks, basins or wash troughs. It operates by sensing a hand in front of the sensor unit. Once
the sensor is activated, the valve will remain open and water will flow until the hand is again placed
in front of the sensor, closing the solenoid valve. It is not necessary for the hand to remain in the
beam for the unit to keep the valve open.
If the solenoid valve remains open for more that 45 seconds, the unit will time-out and close the
valve automatically. This is intended to conserve water and prevent overflows.
COMPONENTS
The wall sensor tap kit comes
standard with a fixed aerated
spout with sensor panel and
bracket, a 1/2” solenoid valve,
and a 24 volt DC transformer.
product description
TRANSFORMER
WITH 4.5m CABLE
SOLENOID CABLE 3m
SENSOR CONNECTOR
CABLE
SENSOR
SPOUT
TR20 TORX BIT
SOLENOID
dimensions
91
70
43
60
55
85
96
SENSOR & SPOUT
SOLENOID
TRANSFORMER
91
70
43
60
55
85
96
All measurements are in millimetres unless otherwise stated.
