1. GENERAL INFORMATION
1.1 - Introduction
This manual is intended for the use of the central balanced-flow high efficiency energiSava 210
and its peripherals (ductwork, vents, controllers).
It is designed to provide clear and safe guidance for the design, installation and use of the
product.
The products are constantly evolving and so, Envirovent reserves the right to modify this manual
without prior notice.
1.2.- Warranty and Liability
Warranty
The energiSava 210 heat recovery system has three years warranty from the date of purchase.
This warranty includes free delivery of necessary spare parts.
The warranty does not cover:
Installation and removal costs
Defects that, in the opinion of Envirovent, are due to improper installation, handling, neglect or
accidental damage.
Those defects that arise as a result from operations or repair performed by a third party without
permission from Envirovent.
To return a defective part, the user should contact their installer.
Liability
EnergiSava 210 is designed for ventilation systems in individual dwellings.
Envirovent is not responsible for damage caused by:
• Improper use,
• Normal wear of components,
• Failure to follow the instructions in this manual concerning safety, use and installation.
• The use of parts not supplied by Envirovent.
1.3.- Safety
G
eneral health and safety standards
The heat exchanger energiSava 210 has been designed to be incorporated into a ventilation
system.
Following installation, there should be no risk to safety, health and the environment according to
EC directives. This also applies to other products used in the installation.
The following general guidelines are important:
Follow the safety instructions to prevent injuries and damage to the motorised fans.
The technical characteristics described in this manual may not be changed.
The motorised fans must not be modified.
The motorised fans must be supplied with a single phase AC supply of 230 V / 50 Hz.
So that the installation complies with
EC
directives, the energiSava 210 must be connected to
the electricity grid according to current national standards.
The device must be installed so that under normal operating conditions, there is no risk of
contact with moving parts and power.
The energiSava 210 meets legal requirements for electrical equipment.
Before working on the machine, always turn the power off.
Use appropriate tools.
Use the machine only for the purpose for which it is intended.
3
