6 - SWITCHING ON THE energiSava 210
To start your energiSava 210 unit use the following process:
1. Verify that all system components are correctly installed and connected:
•
Fresh air intake duct insulated and connected correctly (Do not use a fresh air intake
equipped with insect screen)
•
Fresh air and exhaust ducts insulated and connected correctly
•
Fresh air and exhaust vents connected
•
Flow regulators mounted in the right direction (if installed)
•
Air outlet using insulated duct and connected to the outside (Using a roof cowl or outlet
without an insect screen)
•
Insulated flexible ducts taut and large radius bends (if installed)
•
Check that the unused spigots on plenums are sealed (if installed)
•
Condensation drain well connected (siphon)
•
Check that all connections are sealed (on the energiSava 210, on plenums and vents)
•
Check the setting of the power circuit breaker
2. Turn on the energiSava 210
3. Adjust the minimum airflow, the kitchen Boost and refresh rate (Free cooling).
17
