7.
Position the fan exhaust pointing off any one of the four sides. If the
exhaust is to be pointed off the side of the AirWall unit, the front and rear
clearance will change depending on which side the exhaust is pointed.
Align the mounting holes in the fan/motor assembly with the mounting
8.
holes in the top plate of the clean-air plenum.
9.
Use the 2 1/2” bolts, flat washers, and flange nuts to secure the
assembly firmly into place. Wipe away any sealant, which may have
squeezed out.
10.
If HEPA (High Efficiency Particulate Air) filters have been specified, attach
them at this time. General instructions are as follows:
