any machinery.
Working space around electrical equipment must be clear of obstructions. Provide
adequate illumination to allow for proper operation.
MAINTENANCE SAFETY
Do not perform maintenance on this machine until you read and understand all the
safety instructions. Assign only qualified service or maintenance personnel to perform
maintenance and repair work on this machine. Consult the maintenance sections in this
manual before starting any service or repair work. When in doubt, contact
Envirosystems Manufacturing, LLC, Tucson, Arizona.
Before removing or opening any electrical enclosure, cover, plate, or door, make sure
the main disconnect switch is in the OFF position. Post a sign at the disconnect switch
indicating that maintenance work is being performed. Working space around electrical
equipment must be clear of obstructions. Provide adequate lighting to allow for proper
operation and maintenance.
Before working on electrical circuits, turn the main disconnect switch OFF and lock it.
When removing electrical equipment, place numbered or labeled tags on those wires
not marked. If wiring is replaced, make sure it is of the same type, length, and size and
has the same load carrying capacity. An electrical technician must analyze the electrical
system to determine the possible use of power retaining devices such as capacitors.
Such power retaining devices must be disconnected, discharged, or made safe before
maintenance is performed.
Unless expressly stated in applicable Envirosystems Manufacturing, LLC
documentation or by an Envirosystems Manufacturing, LLC representative, do NOT
work with electrical power "ON". If such statement or advice exists, working with
electrical power "ON" should be performed by an Envirosystems Manufacturing, LLC
representative. The user must determine that any other person performing work with
electrical power "ON" is trained and technically qualified. See DANGER: HIGH
VOLTAGE next page.
__________________________________________________________
DANGER: HIGH VOLTAGE
Before working on any electrical circuits, turn the machine main
disconnect switch "OFF" and lock it.
Unless expressly stated in applicable Envirosystems Manufacturing,
LLC documentation or by an Envirosystems Manufacturing, LLC
representative, do NOT work with electrical power "ON".
