GENERAL INFORMATION
The AirWall dust collection unit will arrive disassembled for shipment and must be
reassembled by the customer or his agent. Unit assembly, with the exception of the
electrical and air connections, can usually be accomplished by anyone with a basic
understanding of common hand tools.
Besides a common set of hand tools, a forklift or chain-fall will be required to position
the fan and motor on top of the AirWall unit clean-air plenum.
NOTE: Envirosystems Manufacturing, LLC (ES) must rely on the skill
and expertise of its customers and the customer’s installation
contractor to ensure that all electrical connections are made
correctly and air connections and regulation devices are installed
and operating properly.
UNCRATING AND INSPECTION
The AirWall unit and related components are shipped on separate skids and some of these
components may be drop shipped directly from an approved ES vendor to shorten
delivery time.
NOTE: Use extreme care when handling the unit and components.
Careless handling can damage delicate parts or affect alignments.
Compare the number of items received against the carrier’s Bill of lading. Inspect all
items for apparent damage. Immediately report any shortages or obvious damage to
the carrier and to ES.
NOTE: Do not return any damaged components without first
contacting ES.
POSITIONING FOR ASSEMBLY
1.
Position the AirWall unit filter section where it will be permanently located.
2.
Check all setscrews and bolts on the exhaust fan/motor assembly to make
sure they have not loosened in transit. If necessary, retighten the
setscrews and bolts.
3.
Rotate the fan impeller by hand to make sure it has not shifted in transit or
been damaged during shipment.
4.
Open the access door, located in the clean-air plenum, above the inlet
baffles on the front of the AirWall unit.
