Environnement AF22e, Техническое руководство, Страница: 43 / 118

Duplicationh prohibited
AF22e
Environnement
S.A
3–9
APRIL 2016
3.2. PROGRAMMING THE AF22E
3.2.1. SCREEN AND KEYBORAD DESCRIPTION AND USE INSTRUCTIONS
The touch screen mounted on the front panel is alternately used to visualize the control screens and the
virtual input screen allowing input and modification of the analyzer parameters. The control button
activation is done by touching.
When the analyzer is connected to a remote computer, the parameters are modified using the computer
keyboard, and the control buttons are activated by clicking with the mouse.
3.2.1.1. Definition of the control screen areas
The areas of control screens are defined as follow:
(1) Browsing area proper to the current screen: when the screen has more than one page,
activate the button
to allow to display the corresponding page.
(2) Measurement or configuration area. It displays the measurement parameters (gas, value,
units...) or the configurable parameters associated with the selected menu.
(3) Manual control area: inlet fluid selection and manual launching of calibration and zero
reference cycles. Information area and advanced functionality access.
Control and information area (3) description
This area is present in all the screens.
Activating this button displays the buttons allowing to manually select the fluid inlets of
the analyzer:
sample inlet, zero inlet, span inlet.
The icon displayed in this place indicates the currently operating status of the analyzer.
The various status icons are: normal operation, warm-up, control,
alarm , network disconnected , maintenance, stand-up.
Information area indicating model and current time of the analyzer.
Activating this button displays the buttons allowing to manually start the analyzer cycles:
starts calibration cycle, starts zero reference cycle.