Enviro Q2GI, Руководство пользователя

Страница: 15 / 44

Page 15
Maintenance And Service
c
Leaning
D
ecoRative
s
uRfaces
:
Painted and porcelain faces should be wiped with a damp cloth periodically. If a plated face has been
purchased, it should be unpacked/unwrapped carefully to avoid getting anything on the surface of the
finish, including cleaners, polish and finger prints. It is important to note that fingerprints and other
marks can leave a permanent stain on plated finishes. To avoid this, give the face a quick wipe with
denatured alcohol on a soft cloth BEFORE lighting the fireplace. Never clean the face when it is
hot. Do not use other cleaners as they may leave a residue, which can become permanently etched into
the surface.
g
Lass
D
ooR
R
emovaL
:
The door will occasionally need to be removed for
installation of media, and cleaning of the Glass.
Step 1. First remove the safety screen by grabbing the
top and bottom of the frame and lifting it up and out.
Step 2.
To remove the glass door use your two index
fingers to pull the spring latches up over the two door
tabs. Fig.18A
Step 3. Once released, pivot the door forward and pull
it out of the bottom door retainers. The door must be
angled in order for it to pull out. Fig.18B
To replace the glass door, simply reverse the above
procedure.
Figure 8. Safety
Screen Mounts
4 positions
WARNING: Do not touch or attempt to remove the
glass door if the fireplace is not completely cold.
WARNING: Never operate the fireplace without the
glass door
Figure 18B.
pivot door fowards.
then lift out, to remove
glass door.
Figure 18A.
Upper Door Latch, Pull foward,
then up and over door tab - (2 positions)
1
2