Pelican PR-5SC 5-Stage
Whole House Filter/Softener Combo
© 2015 Enviro Water Solutions LLC
3060 Performance Circle, Suite 2. DeLand, FL 32724
PR-5SC Rev A
Page 11
www.pelicanwaterretail.com/
Sediment Filter Installation
Figure 7
1.
Unscrew the cover from the Blue Filter Housing.
2.
Remove the plastic covering from the Sediment Filter.
3.
Place the Sediment Filter onto the Stand Pipe in the Blue Filter Housing.
4.
Lubricate the o-ring with clean silicone grease before attaching the cover onto the housing.
5.
Screw the cover onto the Blue Filter Housing until hand-tight.
6.
Tighten the Blue Filter Housing using the supplied Filter Wrench (counter clockwise).
Sediment
Filter Installation
Figure 8
1.
Shut off the water.
2.
Attach the Mounting Bracket to the wall using the supplied Phillips Head Screws and
Washers.
3.
Attach the Filter System to the Mounting Bracket using the supplied Bolt Head Screws.
4.
Determine the size of your inlet water supply line. PVC Reducers may be needed to fit the
1”
Filter System.
Notice:
The Filter Cover comes with a 1” threaded female inlet/outlet and will require additional fittings to
adapt to your plumbing. A shut-off valve is recommended prior to the Pre-Filter System.
Filter Cover
Sediment Filter
O-Ring
Stand Pipe
Blue Filter Housing
Top View Filter
Blue Filter Housing
Inlet Water
Supply
Mounting
Bracket
