manualshive.com logo in svg

Enviro Pelican PR-5SC, Руководство пользователя, Страница: 8 / 20

Поделиться
Скачать
Enviro Pelican PR-5SC Скачать руководство пользователя страница 8

Pelican PR-5SC 5-Stage 
Whole House Filter/Softener Combo

© 2015 Enviro Water Solutions LLC
3060 Performance Circle, Suite 2. DeLand, FL 32724

PR-5SC Rev A

Page 8

www.pelicanwaterretail.com/

Carbon Tank Wash

!IMPORTANT!

Do not perform the Carbon Tank Wash until the Carbon Tank Soak process is complete.

Notice:

Water will flow out of the downflow inlet side of the Bypass Valve during this process. Be sure you perform 

this series of steps in a location suitable for water flow.

Figure 4

1. Reattach the garden hose to the Hose Bib Assembly.
2. Slowly turn on the water 1/4 turn for this entire process.
3. Run water through the upflow inlet side of the Bypass Valve for 15-30 minutes or until the water

discharging from the downflow inlet side of the Bypass Valve runs clear.

4. Turn off the water.
5. Remove the Hose Bib Assembly from the upflow inlet side and attach it to the downflow inlet side

of the Bypass Valve.

6. Run the water through the downflow inlet side for 1 minute or until the water runs clear.
7. Turn off the water.
8. Remove the Hose Bib Assembly from the Bypass Valve and disconnect the garden hose.

Note: 

Please save the Hose Bib Assembly. It will be used in the future for the carbon exchange.

UPFLOW

INLET

DOWNFLOW

INLET

Water

Bypass Valve

Whole House Water Filter

Garden

Hose

Hose Bib 
Assembly

Содержание Pelican PR-5SC





















Отзывы:

Нет отзывов