Envion EA150, Руководство пользователя

Страница: 6 / 9

ENVION EA150 ENVION EA150
MAINTENANCE
The Envion EA150 professional air purifier is almost maintenance free! Our 3-in-1 True HEPA filter
lasts 6 to 9 months, depending on use and environment conditions. The
"Change Filter" light will
turn on when it's time to change the filter.
Before replacing the True HEPA filter of your Envion EA150 professional air purifier, turn off and
unplug the unit from the electrical outlet and read all safety instructions and important warnings
in this owner’s manual.
Replacing the 3-in-1 True HEPA Filter
1. Make sure unit is turned off and unplugged. Release the inlet grill by rotating is
counterclockwise and then lift off. (see diagram of Main Parts).
2. Remove the inlet grill from the unit as shown below.
3 . Grasp the left and right frames of the True HEPA filter through the indentations
on the sides of the filter enclosure and remove the filter.
4 . Insert a new True HEPA filter, then snap the inlet grill back into position and rotate clockwise
until it locks into place. Line up the on the grill with the on the air purifier. These are on
the right side of the unit when facing the front grill.
5 . Plug in the unit and then turn it on. Press the Speed & Power buttons together for 3 seconds
to reset the "Change Filter" light.
To Order A Replacement 3-in-1 True HEPA Filter
The True HEPA filter should be changed every 6 to 9 months. Simply contact our customer service
department at
1.800.875.8577 or go online at envionproducts.com.
The Envion replacement true HEPA filter part number is: EA150F
OPERATING THE ENVION AIR PURIFIER
CONTROLS/SETTINGS:
Power Control – To operate the Envion air purifier, press ON/OFF button to turn on the air purifier.
Press SPEED button to cycle through the fan speeds.
Fan Speed Control – The Envion air purifier, has three different speeds of cleaning,
HI, MED and LOW. Press the SPEED button until your desired speed.
Control Panel
2.
4.
1.
3.
9 8