Entryvue 13507, Руководство пользователя, Страница: 9 / 11

Inputting of code (ex.: 1)
range: 0 : (enable) / 1 : (disable)
1 +#
Input the master code.
(Default : [
1 2 3 4
] +[#] )
(RED)
ON
(BLUE)
OFF
Beep + , Beep
7. Reset code setting 8. * &# function setting
(Default : Normal)
6. Setting operation tone
(Default : ON)
5. Setting the unlock mode
(Default : 0 (opened))
Input the setting code.
04+#
(RED)
ON
(BLUE)
ON
Beep + , Beep
(RED)
ON
(BLUE)
OFF
Beep +
(RED)
ON
(BLUE)
OFF
Beep +
- The unlock mode can be set
on both monitor and door
station, and the valid code is
the number you set last time.
- When the operation tone is
set to 0, pressing the digital
keypad will give out a sound of
beep.
- When the operation tone is
set to 1, pressing the digital
keypad will result in flashing
once.
- When the item is set to 0,
press the button to cancel the
input, and press the # button to
confirm the input.
- When the item is set to 1,
press the # button to cancel the
input, and press the button to
confirm the input.
- Cancel all the passwords
except the master code.
- Restore the master code to
default value (1,2,3,4).
Inputting of code (ex.: 1)
range: 0 : (open) / 1 : (close)
1 +#
Inputting of code (ex.: 1)
range: 0 : (on) / 1 : (off)
1 +#
(RED)
ON
(BLUE)
OFF
Beep +
(RED)
OFF
(BLUE)
OFF
Beep + , Beep
(RED)
ON
(BLUE)
OFF
Beep +
Input the setting code.
05+#
(RED)
ON
(BLUE)
ON
Beep + , Beep
Input the setting code.
06+#
(RED)
ON
(BLUE)
ON
Beep + , Beep
Input the setting code.
07+#
(RED)
ON
(BLUE)
ON
Beep + , Beep
- When the “ * cancel” key is pressed, the LED lights off, the buzzer beeps, and the system exits the setting mode
- When there isn’t any operation in 10s, the LED lights off, the buzzer beeps, and the system exits the setting mode
Inputting of code
1 2 3 4 +#
Inputting of code (ex.: 1)
range: 0 : (normal) / 1 : (reverse)
1 +#
0/1 0/1 0/1
-15- -14-
Input the master code.
(Default : [
1 2 3 4
] +[#] )
(RED)
ON
(BLUE)
OFF
Beep + , Beep
10.Interference resistant grade
setting (Default : 2)
9. Call tone setting
(Default : enable)
Input the setting code.
08+#
(RED)
ON
(BLUE)
ON
Beep + , Beep
(RED)
ON
(BLUE)
OFF
Beep +
- If the item is set to 0, the unit
will respond a call tone when
pressing the “CALL” button.
- If the item is set to 1, the unit
will have no responds when
pressing the “CALL” button.
- The larger you set the
interference resistant grade,
the stronger it will be, but the
sensitivity of the keypad will be
lower.
- The interference resistan
grade setting also will activate
the keypad checking.
(RED)
OFF
(BLUE)
OFF
Beep + , Beep
Input the setting code.
09+#
(RED)
ON
(BLUE)
ON
Beep + , Beep
- When the “ * cancel” key is pressed, the LED lights off, the buzzer beeps, and the system exits the setting mode
- When there isn’t any operation in 10s, the LED lights off, the buzzer beeps, and the system exits the setting mode
0/1
Inputting of code (ex.: 3)
range: 0~5
3 +#
(RED)
ON
(BLUE)
OFF
Beep +