-13-
-12-
ORDER
SETTING ITEMS
SETTING RANGE
DEFAULT VALUE SETTING CODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Reset all settings
1, 2, 3, 4
1, 2, 3, 4
1, 2, 3, 4
-
-
-
-
-
-
00
01
02
03
04
05
06
07
08
09
10 - 17
18
19
20 - 59
60 - 99
Setting the master code
1 - 12 digits
Valid keys: 0 - 9
Setting the key
illumination time
10 to 99 seconds /
permantly lit
10 seconds
Setting the unlock time
01 to 99 seconds
1 seconds
Setting the unlock mode
0: opened/ 1: closed
opened
Operation tone settings
0: on/ 1: off
on
Reset code settings
*
&# function settings
0: Normal / 1: Reverse
Normal
Call tone settings
0: Enable / 1: Disable
Enable
Interference resistant
grade settings
Valid keys: 0 - 5
2
Reserve (not used)
Reserve
Reserve
Setting the code for
Temporary 1
1 - 12 digits
Valid keys: 0 - 9
1 - 12 digits
Valid keys: 0 - 9
Setting the code for
Temporary 2
Setting the code for
user group 1
1 - 12 digits
Number of codes: 40
Valid keys: 0 - 9
1 - 12 digits
Number of codes: 40
Valid keys: 0 - 9
Setting the code for
user group 2
1
4 5 6
9
8
0
#
7
*
2 3
blue
red
Input the master code.
(Default : [
1 2 3 4
] +[#] )
(RED)
ON
(BLUE)
OFF
Beep + , Beep
Each operation is indicated by the lighting up of the LED
indicators on the right section of the unit, and by the
sound of the buzzer.
3. Setting the key illumination
time (Default : 10s)
4. Setting the unlock time
(Default : 1s)
2. Setting the master code
(Default : 1 2 3 4)
1. Reset all settings
Input the setting code.
00+#
(RED)
ON
(BLUE)
ON
Beep + , Beep
Inputting of new master code
(ex.: 4321) (1~12 digits)
4 3 2 1 +#
(RED)
ON
(BLUE)
OFF
Beep + , Beep
Inputting of code
1 2 3 4 +#
(RED)
ON
(BLUE)
OFF
Beep + , Beep
- All settings will be restored to
their default value.
- When power on or rest of all
settings is being activated, the
keypad checking will start,
meanwhile the illumination
keys will flash, any contact of
the keypad is forbidden.
After finishing checking, the key
will stop flashing and give out a
long sound of beep.
- The master code is valid with
1~12 digits,the same code
cannot used both the user code
and the master code, it is
recommended that you modify
the default master code.
- The unlock time can be set on
both monitor and door station,
and the valid code is the
number you set last time.
- If the key illumination time is
set to 00, the key will lightup
permantly when power on.
- If the key illumination time is
set to 10~99, the key will light
up for 10~99 seconds. In this
mode, the light of the keys will
be key off in standby mode,
touching any invalid digital key
can result in illuminate of key.
Inputting of code (ex.: 10)
range: 00 or 10~99
10 +#
(RED)
ON
(BLUE)
OFF
Beep + , Beep
(RED)
OFF
(BLUE)
OFF
Beep + , Beep
Inputting of code (ex.: 09)
range: 01~99
09 +#
(RED)
ON
(BLUE)
OFF
Beep + , Beep
Input the setting code.
01+#
(RED)
ON
(BLUE)
ON
Beep + , Beep
Input the setting code.
02+#
(RED)
ON
(BLUE)
ON
Beep + , Beep
Input the setting code.
03+#
(RED)
ON
(BLUE)
ON
Beep + , Beep
- When the “ * cancel” key is pressed, the LED lights off, the buzzer beeps, and the system exits the setting mode
- When there isn’t any operation in 10s, the LED lights off, the buzzer beeps, and the system exits the setting mode