4
IP1938EN - 2017-12-07
1. General safety precautions
This installation manual is intended for qualified personnel only.
Installation, electrical connections and adjustments must be performed in accordance with Good Working Methods and in
compliance with applicable regulations.
Before installing the product, carefully read the instructions. Bad installation could be hazardous.
The packaging materials (plastic, polystyrene, etc.) should not be discarded in the environment or left within reach of chil-
dren, as these are a potential source of hazard.
Before installing the product, make sure it is in perfect condition.
The protective casing of the automation must be removed by qualified personnel only.
For repairs or replacements of products only original spare parts must be used. The installer shall provide all information relating
to automatic, manual and emergency operation of the motorized door, and provide the user with operating instructions.
2. Technical
data
3. Installation
MD1
MD2
Temperature
-20 °C - +55 °C
-20 °C - +55 °C
Degree of protection
IP20
IP33
(Fig. 1) On VALOR automations, fix the MD1 display module as prearranged on the automation head, or (alternatively) using the
MDA support near the automation itself.
(Fig. 2) On QIK80EH automations, fix the MD2 display module as prearranged inside the barrier cabinet using the bracket supplied,
or (alternatively) near the automation itself.
