Entre Matic Ditec Energy 0DT828, Руководство по установке

Страница: 31 / 48

- 31 -
0DT828 2014-06-13
17 16
4. ELECTRIC CONNECTIONS
4.1 Control panel
• Insert the cables with pre-wired terminal boards in the housing, and connect them to the cards (fig.16). Fit the cables in
the conduit and connect the connectors on the motor (fig.17).
4.2 Connecting the control panel / motor / security
• Figure 18 shows the layout of the cables supplied, and their position in the door; each cable is identified by a special code
on an adhesive label.
4.3 Safety photocells
• Wire the device as per the diagram (fig.18).
• Make the connections in the control panel, as shown in the diagrams
A935G/E
A935L
7982 7982
A451L
A934E/L
0 1
Tx1 Rx1
0 1
0 1
Tx2 Rx2
0 1
7978
4327
7979 7825A
4328
FC
M
18
C T
Black Blue Black Blue Orange Red
Black Blue Orange Red Black Blue
Correctly size the line conductor cross-section by referring to the indicated absorption and taking the length and
installation of the cables into account.
EN