Entre Matic Ditec Energy 0DT828, Руководство по установке

Страница: 34 / 48

- 34 -
0DT828 2014-06-13
1 2 3 4 5 6
ON
49E
Trimmer Description
TC
Setting automatic closing time. From 0 to 30 s.
Note: after the activation of the stop command, once contact 1-9 has closed again, the
automatic closing is only activated after a total, partial or step-by-step opening command.
RP Motor partial opening adjustment. From 0 to 30 s.
Jumpers Description OFF ON
SO
Reversal safety switch
function.
With the automation blocked, if the
contacts 41-8 are open, it is possible to
activate the opening operation.
With the automation blocked, if
the contacts 41-8 are open, any
operation is impossible.
EO Electric brake.
Do not use Normal.
0 s 30 s
0 s 30 s
SIGNALS AND SETTING
Button LED
Starts the opening operation. The green LED on indicates the presence of the 24 V=power supply.
Starts the partial opening operation.
Starts and stops the STOP operation. the red LED on indicates that the STOP has been activated.
the flashing red LED indicates that the safety devices have been activated.
Starts the closing operation.
ON
Dip - switch Description OFF ON
DIP 1 Control 1-3 function. Step-by-Step Opening
DIP 2
Restore automatic closing
time.
Do not use 100 %
DIP 3 Preflashing set at 3 s.
Disabled during
opening
Enabled for both
opening and closing
DIP 4 Application type. Do not use Rapid door
DIP 5 Dynamic brake. Disabled Do not use
DIP 6 Double speed Disabled Do not use
LED On Flashing
POWER 24 V= power supply. /
SA
Indicates that at least one of the safety
contacts is open. ( 6 - 8 - 9 )
- Indicates the STOP operation activated by pushbutton panel
PT4 (if present).
- If the AUTOTEST device is installed, this indicates a safety
test failure (terminal 41).
- On power on, the LED flashes to indicate the number of
operations performed:
each rapid flash = 10000 operations
each slow flash = 100000 operations
IN
Activated at every command and
adjustment to the dip-switch and jumper.
/
11
Indicates that the 0-11 limit switch
contact is open.
/
12
Indicates that the 0-12 limit switch
contact is open.
/
17
Indicates that the 0-17 limit switch
contact is open. (not used)
/
Ditec Energy
Dip-switches
setting