EntraPass MorphoAccess SIGMA Lite Series, Руководство по установке

Страница: 51 / 74

the terminal. Once the template request is posted to the external database, the
terminal shall wait for the finger template from the external database to start
authentication. Further process shall be same as authentication.
Polling Process using buffer:

The user’s input ID will be queued in the terminal’s queue, which is polled by
external application.

External application waits for the User ID by polling the buffer. After getting an
user ID, it will search the template in database and send template to terminal for
further authentication.

The user is authenticated by the external device and granted access accordingly.
MorphoAccess® SIGMA Lite Series terminal also has distant commands to retrieve
polling buffer status and polling buffer data. Refer to the MorphoAccess® SIGMA Lite
Series Host System Interface Specification document.
How to Activate?
External database mode can be activated through Webserver > Complete
Configuration, by setting “ucc.enable_external_database” parameter to 1. Only an
admin user can activate polling mode. You can refer to the MorphoAccess® SIGMA
Lite Series Host System Interface Specification document to know how to set this
parameter.
NOTA : When terminal is in L1 legacy mode, then polling mode can be configured using
SecureAdmin application.
www.TURNSTILES.us / www.entrapass.com / 8641 S. Warhawk Road, Conifer, CO 80433 / 303-670-1099