EntraPass MorphoAccess SIGMA Lite Series, Руководство по установке

Страница: 36 / 74

Tamper Switch
Figure 13: Tamper switch wiring
3 Light Blue Switch 1 Tamper switch contact
4 Pink Switch 2 Strip on tamper switch
Operating principle for the switch

Product installed on the wall plate: switch enabled (contact closed).

Product opened (rear connectors accessible): switch disabled (contact open).
Nominal characteristics of switch block
Electrical characteristics: 100 mA at 30 VDC max (Resistive load) according to the
safety extra low voltage standard.
This MorphoAccess® SIGMA Lite Series terminal is part of security system;
it is customer’s responsibility to connect the tamper switch (contact) to
physical access controller, in order to detect unauthorized access to the
connector blocks.
www.TURNSTILES.us / www.entrapass.com / 8641 S. Warhawk Road, Conifer, CO 80433 / 303-670-1099